Fanatec Clubsport Pedals V3 Brake Performance Kit

$59.90
Save $0.00


Key Features

  • Can be used on the brake pedal of the ClubSport Pedals V3 (inverted)
  • Provides a realistic brake point pressure feeling like in a real race car
  • Adjustable in pedal travel and resistance by mixing and matching the various hardness and diameter of the Elastomer springs together with the PU foam
  • Easy to lubricate and super durable with well over 1 Million cycles
  • Elastomer springs manufactured from the high-end material Eladur, “made in Germany”
  • There are many possible combinations of Elastomer springs.
Fanatec Clubsport Pedals V3 Brake Performance Kit

Gain the maximum advantage

The human body memorizes muscle tension much better than foot position. This is why all car brakes measure the pressure and not the travel. Race and F1 cars have almost no travel at all.

 

Compatible to ClubSport Pedals V3

This Brake Performance Kit is the perfect upgrade for your ClubSport Pedals V3 (inverted), increasing the brake pressure point feeling​ by reducing the brake pedal travel and providing a higher brake pressure capability.

Installed at the preload screw

The red and/or green Elastomer springs and the short Polyurethane spring will be installed to the preload screw of the brake unit.​

 

Mix& Match

There are 8 resistance and travel options with the combinations of the red and green Elastomer springs and their two diameters. The PU foam spring is an optional component to set up a lighter start force which will double the amount of possible configurations to 16.

 

Green elastomer spring

The green Elastomer spring is the harder material version. For fine-tuning, two thicker and harder ones (Ø 13mm) as well as a thinner and softer one (Ø 12mm) are included, both 20mm in length

Red elastomer spring

The red Elastomer spring is the slightly softer material version. Also, two thicker and harder ones (Ø 13mm) as well as a thinner and softer one (Ø 12mm) are included, both 20mm in length.

Compatibility

  • ClubSport Pedals V3
  • ClubSport Pedals V3 inverted
  • Can be used on the brake pedal of the ClubSport Pedals V3 (inverted)
  • Provides a realistic brake point pressure feeling like in a real race car
  • Adjustable in pedal travel and resistance by mixing and matching the various hardness and diameter of the Elastomer springs together with the PU foam
  • Easy to lubricate and super durable with well over 1 Million cycles
  • Elastomer springs manufactured from the high-end material Eladur, “made in Germany”
  • There are many possible combinations of Elastomer springs.

  • 2x Elastomer spring red Ø13 x 20 mm
  • 1x Elastomer spring red Ø12 x 20 mm
  • 2x Elastomer spring green Ø13 x 20 mm
  • 1x Elastomer spring green Ø12 x 20 mm
  • 1x Polyurethane spring (PU foam) Ø13,5 x 15 mm
  • 1x Lithium grease bottle (only for Elastomer spring)
  • 1x Installation tool (Fix-1) (G)
  • 1x Quick Guide

Pagnian proudly supplies Fanatec products and provides warranty coverage in line with the official Fanatec manufacturer’s warranty guidelines. All Fanatec products purchased from Pagnian are covered by a 3-year warranty from the date of purchase, protecting you against defects in materials and workmanship under normal intended use.

This warranty reflects the supplier’s conditions and applies only to products purchased through authorised channels. It does not cover damage caused by misuse, improper installation, unauthorised modifications, normal wear and tear, or use outside of the manufacturer’s intended purpose.